How To Conserve on Electrical Costs with Smarter Lighting Ideas
The dilemma is how to get the most attractive lighting in and around your home while keeping your electric bill down. Let?s start with some facts about home electric costs. If your home was built before 1990, chances are that it uses more electricity than homes built after 1990. Energy efficiency just wasn?t a major concern in this country (and elsewhere in the world) before the 1990s. Another interesting fact is that most energy experts agree that major appliances are the primary energy hogs in our homes and lighting costs only amount to about 20% to 25% of our electric bills.
Nonetheless, 25% of a $186 electric bill is still a pretty hefty chunk of the average homeowner?s budget.
Before we get into some detailed suggestions, there are some initial, practical suggestions regarding how to keep that electric bill relatively tame. In terms of major appliances, use cost-saving settings whenever possible. If you use an electric dryer, make sure you dry full rather than partial loads. Even though you may have a number of gas appliances, they still use a certain amount of electricity so make sure to use them in such a way that electrical consumption is minimized.
Ceiling fans can also be an effective means of reducing energy consumption. Although the ceiling fan doesn?t actually make the temperature warmer or cooler, the motion of the air makes it feel that way which, in turn, allows you to set the thermostat at a more cost-effective level.
In terms of some lighting conservation basics, get into the habit of always turning off any lights when they?re not needed. Leaving the porch light on all night is a tradition that many people observe. The original thinking was around issues of security. In some areas of this and other countries, security is still an issue and leaving the outside light on all night is probably still a good idea (although there are no statistics that I?m aware of that this deters burglary or break-ins). If you live in a relatively secure and safe area, don?t turn the outside porch light(s) on unless you?re expecting guests or a family member typically comes home after dark.
If your lamps have several brightness settings, don?t always select the brightest setting. See if you can get buy on one of the lower settings without causing eyestrain or difficulty in reading. Incandescent bulbs and fixtures are among the worst offenders when it comes to wasting energy. Their basic design results in the majority of energy creating heat rather than light to say nothing of the mounting evidence that points to the incandescent light as a significant source of air pollution. The primary appeal of the incandescent bulb is that they are relatively inexpensive, can be found in a variety of stores (including supermarkets) and are available in a wide variety of sizes and shapes.
Selecting energy saving light bulbs will result in greater lighting efficiency since the electric current passes through the gas in the bulb, lighting it without causing wasteful heat. An important feature when it comes to buying an energy saving bulb, is that a lower wattage bulb will give you the equivalent illumination that a higher wattage incandescent bulb does. For example, you can replace a 60W incandescent bulb with a 13W to 18W energy saving bulb. Another important consideration is that the energy saving bulb can last up to twelve times longer than its traditional counterpart, saving you up to twenty dollars a year per fixture.
One of the best ways to conserve electrical energy is to replace incandescent fixtures and bulbs with compact fluorescent bulbs. Now available in hundreds of colors, the fluorescent bulb uses about a third of the energy used by an incandescent bulb and generally lasts 15 to 20 times longer. Although energy savings bulbs cost more per unit than an incandescent bulb, the difference in cost will be made up by the bulb?s efficiency and length of life.
Some additional energy-saving ideas include using dimmer switches to set the lighting level at just the right level, layering light and using outdoor motion detectors that illuminate only when motion is detected.
This article presents just a few of the ways you can conserve on energy and make your electric bills less of a shock (excuse the pun).
LightnBreezy.com is a well-known source for Westinghouse indoor lighting fixtures and fans. LightnBreezy.com features hundreds of products, at deep discounts, to choose from. To order visit us at LightnBreezy.com .
|
|
 |
 |
|
Dan Carazo to Head New Electrical Marketing Group at Austin & Williams to Provide Advertising and Marketing Services for Electrical Industry Manufactu
Specialized electrical marketing group formed in order to provide marketers of electrical power and datacom networking equipment, products, and tools with advertising, marketing, branding, PR, and direct marketing services.
Electronics directory- melting point of the electrical industry
Whether it is an iphone, or an ipod or a fancy Nseries Nokia phone, these gadgets are a consumer must have now a days. It is not only globalization that has brought the world under one roof but electronic goods has also made our lives compact and induced tech dependability on us. We cannot pass a single moment without these gadgets whether it is at school or at work, or in the comfort of our home.
HVAC, Plumbing and Electrical Sales Training Series to be Broadcast Live on Internet TV
www.ContractorSelling.com has announced that they will broadcast the next three "Total Immersion Sales Summit's" LIVE via streaming internet TV via the internet. The week-long HVAC, plumbing and electrical sales training sessions will be held starting April 20th, May 11th and also on May 18th of this year. The Total Immersion Sales Summit's feature some of the most radical "outside the box" methods of creating desire in the customers of plumbers, electricians and HVAC techs & sales people that have ever been seen and have created the best results bar none.
Electrical Courses ? Start One Now
An article giving advice on becoming an electrician
Electrical Courses are generally taken up by people who wish to become successful electricians in their near future Now-a-days a lot of competition prevails in every field and so there is a demand for people who are perfectionists in their field
Easy Electrical Cord and Plug Repairs
When it comes to electricity, safety is the primary concern. Though your appliances plug or electrical cord looks like an easy repair project, these do-it-yourself projects are better left in the hands of a professional. Some signs that your cords and plugs need to be repaired include products not working, no power, or frayed and split cords. Sometimes the problem is more serous and you may notice that circuit breakers continually shut off. A professional electrician may even need to determine the source of the problem. However, whether you think its a case of repairing a plug or a larger problem such as adding a 220v outlet, an electrician should be contracted. Since the dangers and risks are so great when someone uses faulty wirin...
Electronics Part Counting Scales Used in Weighing Electrical and Plumbing Hardware
How many parts are in that box? This is a question that is asked in many different industrial situations. Any time that inventory is updated, the total number of different hardware items, or electrical components, or plumbing fittings, or plastic parts must be determined. When items are being packed for shipment, the exact number of pieces must be accurately known. When receiving accepts incoming packages, the number of parts must be confirmed.
Electrical Safety Tips
Among the things that we do know about electricity is that faulty electrical system is almost always the cause of fire and injuries whether in commercial or residential infrastructures. This means that even at the first sign of electrical problems, have it fixed immediately, before things lead to a more serious problem.
|
 |
|